Brake and swing arm links
Showing here how the rear of the brake rod, brake arm, and wheel adjusters are installed. Also note the teeth on the sprocket. Both front and rear sprockets are worn out as was the chain; all three being replaced with new.
Showing here how the rear of the brake rod, brake arm, and wheel adjusters are installed. Also note the teeth on the sprocket. Both front and rear sprockets are worn out as was the chain; all three being replaced with new.
Front view of the rear brake rod and how it and brake lever is assembled.
Suspension link orientation for when we go to reassemble the swing arm. Also note the direction the pivot bolts are installed.
Just another picture so we can document the rear link assembly. When taken apart all the bushings and bearing will be cleaned and checked to be sure they are still in good condition. (Actually already passed this point and finished. Don't think any pictures were taken of the process.)
No comments:
Post a Comment