YZ 80 Stator Cover Repair
The shift lever - which is not correct for this bike - had rubbed a groove into the cover.
The shift lever - which is not correct for this bike - had rubbed a groove into the cover.
Filled with JB Weld plastic repair and sand with 220 grit.
Kept working it down with 220, 400,600, 800, 1000 and 2000 grit wet dry paper. Feather edge the edges...
Sand rest of part and primer,
Coat with ten light coats to build paint, let dry two days and viola it's done.
No comments:
Post a Comment